Compatible with sensorless brushless motors.
High anti-interference capability.
Using advanced software interface to set up or update the software.
Super smooth and accurate throttle linearity,Fast response to throttle input.
Mutiple protection features: low voltage cut-off protection, over-heat protection and throttle signal loss protection.
Features: Compatible with sensorless brushless motors. High anti-interference capability. Using advanced software interface to set up or update the software. Super smooth and accurate throttle linearity. Fast response to throttle input. Mutiple protection features: low voltage cut-off protection, over-heat protection and throttle signal loss protection. Specification: Colour: red + black Material: ABS size: 16x8x2cm Cont Current/Burst Current:35A/120A Motor Type: Sensorless Brushless Motor For 2s Lipo or 6 cells NIMH:1.on-road：28XX-size or smaller motor with the KV<6000;2.Off-road: 28XX-size or smaller motor with the KV<4000 For 3s Lipo or 9 cells NIMH:1.on-road：28XX-size or smaller motor with the KV<4000;2.Off-road: 28XX-size or smaller motor with the KV<3000 Instuctions 1. Connect BEC wires with the receiver. 2. Connect motor wires with ESC. 3. Turn on the transmitter. 4. Connect battery pack with ESC then switch on the ESC. 5. When the connection of motor and battery is finished, the motor emits "Beep-Beep" tone. 6. When the throttle stick is in the neutral position, the motor re-emits "Beep-Beep" tone. 7. The ESC is workable. Programmer card : Low voltage cut off: 3.1V/Cell 2.8V/Cell 3.3V/Cell No cut-off Start mode:Medium, soft, strong Max brake force: 25%, 50%, 75%, 100% Max reverse force: 25%, 50%, 75%, 100% Neutral range: 6%, 9%, 12%, work state Colour:black Material:ABS Size:8 x 5.4 x 1.3cm Package size: 17.2 * 9.2 * 2.7cm Package weight: 87g Package list: 1 * 35A Brushless Electric Speed Controller 1 * Program Card