Oscillating Lever: The fan oscillates when the lever is in a "down" position
Fan head angle adjustment: To reset the oscillating angle, turn off the oscillating lever, move the head of the fan to the new "start" position, and turn the oscillating lever.
Tilt adjustment screws: To change the degree of up or down tilt, loosen screws, set position, and tighten.
Clean the fan with a soapy cloth. Wipe with a wet rag and dry with a duster. DO NOT use gasoline, benzine, thinners, or other solvents, Lubrication is not necessary, as the motor has been lubricated and sealed at the factory
Instructions for dash mounting:- 1. Unscrew the Clip Clamp 2. Find a suitable place to install the fan, for example, on the dashboard or doorpost. Be sure the fan can oscillate freely 3. Drill two holes in the bodywork about 1/8" in diameter opposite the holes in the foot-plate 4. Secure the footplate with the tapping screws, and insert the cushion between the plate and the bodywork. Secure the unit by tightening the screw