<strong>Convert your hinged door into a self-closing one with the safety spring door closer.&nbsp;</strong></em><br /> <br /> Installation is a breeze thanks to the closer and plastic slide plate being surface mounted &ndash; within minutes you can have a self-closing door!&nbsp;<br /> <br /> <strong>Distance of Travel:&nbsp;</strong><br /> <br /> The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door&rsquo;s distance of swing will be reduced to the point of where it makes contact with the bullet-shaped housing of the closer.&nbsp;<br /> <br /> These closers feature an adjustable closing speed and they are non-handed, allowing them to be used on both left and right-handed swinging doors.&nbsp;<br /> <br /> These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold open feature.&nbsp;<br /> <br /> <strong>Fixing Instructions:</strong><br /> <br /> 1. Fix the closer vertically to jamb on the hinged side of the door.<br /> <br /> 2. To set tension turn the center of the closer opposite to the arrow.<br /> <br /> 3. Place the operating arm into the nearest hole to the door.<br /> <br /> <strong>Notes:</strong><br /> <br /> - After the door closer is fully installed, you can fill the hole with the included plugs.<br /> <br /> - Please install the door closer at exact position.<br /> <br /> - You can adjust the tension as needed by the adjusting rod.<br /> <strong></strong><br /> <strong></strong>