How to use: 1. If you are pasting on the surface of glass or tiles because the material is relatively smooth, it is best to dry the veneer with a clean rag before pasting, which is easier to paste and has a better leveling effect; 2. For some larger pattern stickers, there may be a little air bubble after flattening. At this time, you can use a scratch card to remove the air bubbles or use a needle tip to pierce the small air bubbles and smooth them out, which will not affect the overall paste effect ; 3. If the pasted wall is damp, aging, or newly painted, it may cause the wall sticker to fall off automatically after pasting or cause the wall to peel off. You can dry the wall with hot air from a hair dryer or wait for the paint to volatilize for a period of time Post it later, but the effect may be different, so please choose the position carefully; 4. If you accidentally paste the wall sticker in the wrong position, you can use a small blade to gently lift off the corner of the wall sticker and tear it off, and then paste it again. This product can be reused under normal conditions, as long as it is not torn;